Cart
Your cart is empty
Add products to get started
Power points, lighting, ceiling fans, rewiring and fault finding. When the DB box keeps tripping or a socket stops working, we trace the cause and fix it properly.
Electrical problems are easy to ignore until the power trips in the middle of dinner or a burnt smell comes from a socket. Most faults have a clear cause: an overloaded circuit, a worn switch, moisture in a fitting or old wiring that cannot handle the appliances families use today. MK Renovation handles electrical works in HDB flats, condominiums, landed homes and offices across Singapore. We add and relocate power points, install lights and ceiling fans, replace switches and sockets, set up dedicated points for water heaters, ovens and hobs, and trace faults that make your circuit breaker trip. We start by understanding what is happening, then test the circuits to find the real cause. Instead of replacing parts at random, we fix the actual problem and check that the circuit is safe before we leave. You get a clear explanation of what was wrong and what we did. For renovation projects, we plan the electrical layout with you before walls and ceilings are closed. Every socket, switch and light point is placed where you actually need it, whether that is beside the bed, above the kitchen counter or behind the TV console, so you are not left relying on extension cords. Because our team also does ceilings, partitions and plaster work, wiring can be concealed neatly and any wall openings are patched and finished properly. One team, one quotation and a clean result.
Tap any item to request a quote for it
Power socket installation
New, additional or relocated power points for any room. Wiring runs in neat trunking, or is concealed in walls and ceilings during renovation.
Switch and socket replacement
Worn, loose, cracked or burnt fittings are replaced with new ones. We also check the wiring behind the fitting so the problem does not come back.
Light installation
Downlights, LED panels, pendants and track lights installed and wired safely. We can add switches in more convenient places at the same time.
Ceiling fan installation
New ceiling fans, replacement of old units and the wiring and switches they need. Each fan is mounted securely and tested before we leave.
Power tripping and fault finding
We test each circuit to trace the one causing your breaker to trip. Then we repair the faulty point, fitting or wiring instead of guessing.
Rewiring and new circuits
Replacement of old wiring in older flats, and new circuits for renovation layouts. Best done while walls and ceilings are open for a neat, hidden finish.
Water heater and appliance points
Dedicated points for water heaters, ovens, induction hobs and other high-power appliances. This avoids overloading shared circuits and extension cords.
Office electrical works
Desk power points, office lighting and wiring for new partitions and meeting rooms. Work can be planned to reduce disruption to your business.
Safety first, then a neat finish
We test circuits to locate the fault instead of guessing and replacing parts. This saves you money on unnecessary replacements. It also means the problem is far less likely to return.
Power is isolated before any work starts, so the job is done safely. When we finish, the circuit is tested again. We only leave when everything is working as it should.
Cables run in proper trunking or are concealed in walls and ceilings, never left hanging. Neat wiring is safer and easier to maintain. It also keeps your home looking clean and finished.
We plan sockets and switches around how you actually use each room. Think bedside charging, kitchen appliances and the TV corner. Good placement means fewer extension cords and adaptors.
You know what was wrong, what we did and what to watch for. We explain in plain language, not technical jargon. If we see other issues, we tell you honestly and let you decide.
Any wall openings made for wiring are patched and finished. Dust and offcuts are cleared away after the job. Your home is left tidy, not just working.
Many electrical calls come down to a handful of common issues. Knowing the warning signs helps you act before a small fault becomes a dangerous one. Tripping power, warm sockets, flickering lights and not enough power points are problems we see often in HDB flats, condos and landed homes. Most of them can be fixed quickly once the real cause is found. Below are the issues homeowners ask us about most, and how we deal with each one.
If your circuit breaker or residual current device trips repeatedly, something on that circuit is leaking current or drawing too much. Common causes are a faulty appliance, moisture in an outdoor or bathroom fitting, or too many high-power appliances running on one circuit. Wet weather can make moisture-related trips worse, which is why some faults only appear after heavy rain. We switch circuits off one by one, test them and find the source. Then we repair the fitting, replace the faulty part or rewire the circuit as needed, and test again before we leave.
A socket that feels warm, crackles, sparks or shows brown marks is a warning sign that should not be ignored. It usually means a loose connection, a worn fitting or a point that is carrying more load than it should. Stop using it and switch it off until it is checked. We replace the fitting, inspect the wiring behind it and confirm the load on that point is safe. If high-power appliances are sharing the same socket, we can suggest adding a dedicated point so the problem does not return.
Older HDB flats were wired for fewer appliances than most families use today. Aircon units, induction hobs, ovens, water heaters and home office equipment each need suitable wiring and enough power points. Relying on extension cords and multi-plug adaptors adds risk and clutter. During renovation, we can add dedicated circuits and extra points so each appliance has a proper supply. If you are buying a resale flat, it is worth having the wiring checked before you move in.
Switching to LED downlights or adding a statement light can change how a room looks and feels. Good lighting design uses a mix of general, task and mood lighting, for example downlights for the whole room, a pendant over the dining table and cove lights for a softer glow. We install new fittings, add switches in convenient places such as by the bed or the door, and replace old fittings that flicker or hum. When lights go into a new false ceiling, we work with our ceiling team so the wiring is planned before the boards go up. The result is a neat ceiling with lights exactly where you want them.
For work that needs a licensed electrical worker under Singapore regulations, we will tell you upfront and arrange it as part of the job. If you are unsure whether your problem is urgent, send us a photo and a short description on WhatsApp and we will advise you on the next step.
From your message to a tested circuit
Tell us what happens, when it happens and send a photo of the DB box or fitting if you can. This helps us come prepared.
We check the affected circuits and test them one by one. This lets us find the actual cause instead of guessing.
We explain the problem and what is needed to fix it. You approve the price before any repair starts.
The work is done safely with the power isolated. The circuit is then tested and we show you that everything works.
Straight answers from our team. Still unsure? WhatsApp us.
The most common causes are a faulty appliance, moisture in a fitting or an overloaded circuit. Bathroom, kitchen and outdoor points are often affected by moisture. Unplugging appliances one at a time can sometimes show the culprit, but it does not always find the fault. We test each circuit to find the exact cause and fix it properly.
Yes. We can add new points or relocate existing ones to where you need them. Outside a renovation, wiring usually runs in neat trunking along walls or ceilings. During renovation, it can be concealed in walls and ceilings for a cleaner look.
Yes. We are happy to install fans and light fittings that you supply. If you have not chosen yet, we can recommend and supply suitable fittings for you. Let us know the model beforehand so we can check the mounting and wiring needs.
No. Switch it off and stop using it until it is checked. A warm, crackling or discoloured socket often means a loose connection or worn fitting that can overheat. It can also mean the socket is overloaded. We will replace the fitting and check the wiring and load behind it.
Yes. Rewiring is best done during renovation, when walls and ceilings are open and the new wiring can be hidden neatly. We plan the new layout of sockets, switches and lights with you first. This is a good time to add dedicated points for aircon, kitchen appliances and water heaters.
Yes. We handle desk power points, office lighting, and wiring for new partitions and meeting rooms. Work can be scheduled to reduce disruption to your staff and customers. Because we also build partitions and ceilings, the whole fit-out can be handled by one team.
Send a photo and a short description. We will reply with the next step.
Tell us about the electrical job. You can also send photos on WhatsApp after you submit.
Real photos from MK Renovation jobs. Tap any photo to view it full size.
